The Three Phases to Post Construction Cleaning

Post construction cleaning is highly beneficial to general contractors, builders, and property owners. They are commonly outsourced after extensive or wide-spread construction work is completed, such as new construction home building, reroofing, drywall remodels, commercial demolitions, and more. Although these services range from light to full-service cleans, they all involve three particular cleaning stages. Continue reading to learn more about commercial construction site cleanup, and where to find trusted drywall installation services you can trust.

Three Phases to Construction Cleaning

There are three general stages, or phases, to construction site cleaning services. There is an initial cleaning plan, regular construction site cleaning, and post construction cleanups. In each phase, a particular degree of cleaning is facilitated with specific tasks and routines. These routines increase the level of safety on site, as well as, allow better functionality and access for the rest of the construction schedule.

Initial Phase of Construction Site Cleaning

Initial construction site cleanup services are required once the framework of a property is completed. When the plumbers and electricians are done with their part of the new construction, the initial cleaning can begin. In this step, stickers are peeled from windows and removed from all major appliances, leftover trash and debris is swept up and removed, a full service deep-sweep and dusting is carried out, and all other unneeded or leftover garbage is discarded. Once all these tasks are accomplished, the site is ready to take on more preparations and construction, such as flooring installations, painting, fixtures, and cabinets.

Phase Two of Construction Cleaning

In this stage, cleaning staffs will facilitate a more detailed and focused degree of cleaning. This includes very careful and meticulous cleaning for areas such as restrooms, bathrooms, sinks, showers, toilets, cabinets, shelving, countertops, and more. Every square inch is covered, from door frames to window ledges. Settled dust, debris, and dirt are wiped clean and all areas are sanitized thoroughly. This step is almost always intended to be completed before the general contractor’s final inspection of the property.

Final Stage of Post-Construction Cleanup

In the final stage of construction site cleanup, staffs go through a “punch list” once all the construction is completed. This includes all cleaning details to make the property perfect for viewings or grand openings. The punch list involves polishing, caulking, sealing, power washing, and “white glove” inspections. It is the last and final step before the property is completely finished.

Selecting a Contractor for Commercial Interior and Exterior Remodeling

Just like homeowners only spend on renovation once every few years, commercial projects too must be remodeled to suit the current needs and requirements. The first step is planning the project. This is the point where you decide the requirements, consider the budget, and select the tasks or aspects that need immediate attention and the ones that can be ignored for now. The remodeling project may include a new segment of the property too. To do all of that within a fixed budget, you need to find a commercial contractor.

In this post, we will talk about the aspects that matter in selecting and working with a commercial interior and exterior remodeling contractor.

1. Make your notes. What kind of remodeling project do you have in mind? If you know your requirements, discussing things further with your renovation contractor will be easier than ever. The list should be made in sync with your priorities. For example, remodeling the conference room of your business premises might be more urgent than redesigning the roof lounge. You need to prioritize your expectations, which will also come handy for budgeting.

2. Finding a contractor. Today, commercial contractors have their own websites, so finding a few options in your city shouldn’t be a challenging task. However, you should check for references with your industry friends and colleagues. Contractors and architectural services that deal with new projects may also take up remodeling tasks, so don’t shy away from contacting the top services.

3. Know more. Don’t hire a contractor unless you are sure of what they can achieve for your project. To get a good idea if they are the right choice, you need to check their previous projects. A commercial contractor who has been around for more than a decade will have the necessary experience, and in the ideal case, they wouldn’t shy away from discussing their portfolio. Check the range of commercial projects they have done in recent years and if they specialize in managing contracts on a lower budget.

4. Set a budget. As a client, you probably know what you can afford to spend on the remodeling project. Quite evidently, the prime task is to find a contractor who can achieve more than what’s on the table. On your first meeting, ask them to offer a clear picture of their charges, how they plan to manage the project and the things they can realistically achieve for your needs, keeping the budget in mind. Many contractors and commercial remodeling services may customize their work to suit your needs, and that’s surely an added benefit.

5. Finally, check the expertise of the concerned contractor. A company that deals in new projects and take up remodeling work should be your first preference. Check if they are willing to share client references and whether they have succeeded in managing a diverse portfolio in their years of operation.

Check online get started, and don’t forget to get a contract ready, with the relevant terms and conditions. Commercial remodeling work can take time, and you would want a company that builds relationships too.

Your Simplified Guide for Comparing Commercial Construction Companies

Commercial projects involve huge budgets and big plans, and quite expectedly, you need a reliable commercial contractor for the job. Construction companies working in the commercial sector have a specific way of doing work. In this post, we will talk about that, along with tips for comparing the options.

Working with Commercial Contractors:

As mentioned above, commercial projects require considerable money and effort. As such, it is important to start with the right steps. The first obvious step in finding a contractor is to make the design and establish deadlines. The whole process of planning can take time, but with a good contractor at work, you can expect to achieve the goals as planned and intended. The concerned contractor will seek your approval for the entire design, then they will get the necessary permits to start the construction. In between, the funds and finances will be discussed, and the contractor is expected to offer genuine assistance with the immediate roadblocks that may seem evident for the project.

Investigating the Options:

Construction companies specializing commercial projects have certain traits that you should be looking for. Here are the things you need to check.

1. Is the company well-known? For big projects, you cannot afford to take the risk, and hence, it is always better to find a contractor that you can rely on. Ask around for references, its best way of moving forward.

2. Know their client. If a commercial contractor claims to be the best in business, they must have the clients to back it up. Don’t shy away from seeking references and take a look at some of the projects they have managed so far. You may want to call some of their clients to know the individual experiences.

3. Find out more about their expertise. The whole process of planning and completing commercial projects is an extensive one, and not all contractors deal with all kinds of things that are involved in the process. Check if the concerned company has the expertise and know-how that you need for the project.

4. Ask for an estimate. Based on the work, you would want to know the cost of hiring a contractor. Again, this is largely dependent on the contract and the things included, but for such projects, transparency is one of the many things you cannot afford to ignore.

5. Check the basics. Work with companies that have an in-house team of experts. You need to find a contractor that’s genuine in its approach and can offer something more than standard services. Check if the company has licenses and permissions to take up such jobs and whether they can do the paperwork and get the required documents to get the job done.

Last, do consider sustainable and green practices for your project. An advanced and renowned contractor will offer such choices for their clients, based on what they need. The initial consultation is one of the main aspects that matter in this regard because you can learn a lot about the possible solutions available.

New Construction Methods – Innovations in Commercial Construction

Did you know about the existence of new and innovative commercial construction designs, services and products? It is absolutely true that there are such things. Some companies are committed to utilizing dynamic science to lead to the discovery of and development of new and innovative products. Additionally these companies have come up with new products and integrated systems that have the industry as a whole continually reinventing itself. We will examine some of these more closely in this article.

For those people who thought innovative construction methods were only possible for residential structures, think again! The commercial construction industry is right behind them. Some participating companies are helping to enhance the performance of building methods and make commercial buildings safer and more durable; in addition to reducing their operating costs. All of these things factor into some designs that are especially attractive to people who are looking at them.

Not only do innovative commercial construction methods make a building safer and more attractive; They also help contractors abide by various building code challenges, which tend to differ based on where in the world they are located. A vital part of a contractor's job is to balance these different needs and various building codes, all at the time of construction. This is an extremely daunting task, but one most companies can master.

One specific kind of construction is known as "tilt-up construction." This is where "a tilt-up building's walls are created horizontally in large slabs of concrete called panels. The panels are then lifted, or tilted up, into position around the building's slab. This means the tilt-up structure's exterior wall is virtually finished when it is tilted into place. " This type of construction gives a commercial project the illusion of having been completed overnight. In reality there is often much work left to be done on the INSIDE to make it truly ready to open for business. Nevertheless; With this kind of construction, the overall time it does take to finish a project is relatively quick.

Another facet of the commercial construction industry to be greatly enhanced by new innovation techniques is commercial roofing. After all, no building is complete without a roof, right? There are specific companies out there who strictly focus on constructing roofs. The best ones have completed 5000+ roofs over their years in business and have received literally over one hundred positive customer reviews. Not only will these companies build your roof in the first place, they provide repair services for catastrophic natural disasters such as severe storms. They typically also offer free inspection services in order to determine if any damage has been done following a storm; or, at the completion of the roof when a building is finished.

Resource information is available; regarding any portion of this article, on the Internet.