Your Simplified Guide for Comparing Commercial Construction Companies

Commercial projects involve huge budgets and big plans, and quite expectedly, you need a reliable commercial contractor for the job. Construction companies working in the commercial sector have a specific way of doing work. In this post, we will talk about that, along with tips for comparing the options.

Working with Commercial Contractors:

As mentioned above, commercial projects require considerable money and effort. As such, it is important to start with the right steps. The first obvious step in finding a contractor is to make the design and establish deadlines. The whole process of planning can take time, but with a good contractor at work, you can expect to achieve the goals as planned and intended. The concerned contractor will seek your approval for the entire design, then they will get the necessary permits to start the construction. In between, the funds and finances will be discussed, and the contractor is expected to offer genuine assistance with the immediate roadblocks that may seem evident for the project.

Investigating the Options:

Construction companies specializing commercial projects have certain traits that you should be looking for. Here are the things you need to check.

1. Is the company well-known? For big projects, you cannot afford to take the risk, and hence, it is always better to find a contractor that you can rely on. Ask around for references, its best way of moving forward.

2. Know their client. If a commercial contractor claims to be the best in business, they must have the clients to back it up. Don’t shy away from seeking references and take a look at some of the projects they have managed so far. You may want to call some of their clients to know the individual experiences.

3. Find out more about their expertise. The whole process of planning and completing commercial projects is an extensive one, and not all contractors deal with all kinds of things that are involved in the process. Check if the concerned company has the expertise and know-how that you need for the project.

4. Ask for an estimate. Based on the work, you would want to know the cost of hiring a contractor. Again, this is largely dependent on the contract and the things included, but for such projects, transparency is one of the many things you cannot afford to ignore.

5. Check the basics. Work with companies that have an in-house team of experts. You need to find a contractor that’s genuine in its approach and can offer something more than standard services. Check if the company has licenses and permissions to take up such jobs and whether they can do the paperwork and get the required documents to get the job done.

Last, do consider sustainable and green practices for your project. An advanced and renowned contractor will offer such choices for their clients, based on what they need. The initial consultation is one of the main aspects that matter in this regard because you can learn a lot about the possible solutions available.

New Construction Methods – Innovations in Commercial Construction

Did you know about the existence of new and innovative commercial construction designs, services and products? It is absolutely true that there are such things. Some companies are committed to utilizing dynamic science to lead to the discovery of and development of new and innovative products. Additionally these companies have come up with new products and integrated systems that have the industry as a whole continually reinventing itself. We will examine some of these more closely in this article.

For those people who thought innovative construction methods were only possible for residential structures, think again! The commercial construction industry is right behind them. Some participating companies are helping to enhance the performance of building methods and make commercial buildings safer and more durable; in addition to reducing their operating costs. All of these things factor into some designs that are especially attractive to people who are looking at them.

Not only do innovative commercial construction methods make a building safer and more attractive; They also help contractors abide by various building code challenges, which tend to differ based on where in the world they are located. A vital part of a contractor's job is to balance these different needs and various building codes, all at the time of construction. This is an extremely daunting task, but one most companies can master.

One specific kind of construction is known as "tilt-up construction." This is where "a tilt-up building's walls are created horizontally in large slabs of concrete called panels. The panels are then lifted, or tilted up, into position around the building's slab. This means the tilt-up structure's exterior wall is virtually finished when it is tilted into place. " This type of construction gives a commercial project the illusion of having been completed overnight. In reality there is often much work left to be done on the INSIDE to make it truly ready to open for business. Nevertheless; With this kind of construction, the overall time it does take to finish a project is relatively quick.

Another facet of the commercial construction industry to be greatly enhanced by new innovation techniques is commercial roofing. After all, no building is complete without a roof, right? There are specific companies out there who strictly focus on constructing roofs. The best ones have completed 5000+ roofs over their years in business and have received literally over one hundred positive customer reviews. Not only will these companies build your roof in the first place, they provide repair services for catastrophic natural disasters such as severe storms. They typically also offer free inspection services in order to determine if any damage has been done following a storm; or, at the completion of the roof when a building is finished.

Resource information is available; regarding any portion of this article, on the Internet.

Commercial Construction Tips – How to Stay On Budget

Keeping a commercial construction project on budget requires determination, vigilance, creativity in problem-solving, and diplomacy. It begins almost at the moment a project is conceived and continues throughout the entire construction period.

There are many reasons a commercial construction project will go over budget. Some causes simply can't be adequately assessed or budgeted, such as delays and materials losses caused by a natural disaster. But many causes relate to poor planning and even weaknesses in the budgeting process itself.

Typical Cost Control Problems

Cost overruns on a construction project happen, despite the most careful planning and control efforts. Some common causes for overruns include:

  • Lack of a well-defined project scope.
  • Poor estimating methods (or standards).
  • Out of sequence start / completion activities.
  • Inadequate comparison of planned-to-actual costs.
  • Unanticipated technical problems.
  • Poor (or no) project management policy and control practices.
  • Faulty schedule resulting in overtime or idle time expenses.
  • Escalating materials prices.

Three Big Mistakes

Review some of the more egregious construction cost overruns of recent years and you might see a familiar pattern to budget overruns. They are commonly made mistakes that can be adjusted and corrected during the contracting phase of a project.

Managing these three weak areas may mitigate or eliminate many of the problems listed above:

  • Incomplete document design: a project owner may hand over the architect's plans and specs to the contractor believing that every detail has been identified. In truth, the owner-architect agreement often only requires the architect to present the plans and specs of a general design intent. The complete in-depth details may not be included. The lack of complete design information places the contractor in the position of demanding more money for work that had not been clearly defined in the plans and specs. Multiple change orders and budget overruns result.
    • Resolution: the owner-architect agreement should specify that the architect will provide a 100% complete set of drawings, specs, and all related documents prepared by engineers (and others working on the project). Responsibility for overages caused by incomplete design falls back on the architect, not the contractor.
  • Complete review of documents prior to bidding: the contractor may seek additional compensation for necessary work that, according to the contractor, was "not shown on the plans and specifications."
    • Resolution: the project owner's contract language should stipulate that all contractors wishing to submit bids must affirm they have reviewed the plans and specs and fully understand the scope and intent of the project. Their price should cover all necessary work to fulfill the "implied or express design intent."
  • The lowest bid: the project owner may face many pressures from investors, shareholders, and board members to accept the lowest bid. But lowest isn't always the best. Underbidding can be risky and costly.
    • Resolution : work with trusted contractors who have completed projects similar to the current one. The contractor with a track record of successful on-time and in-budget builds is far more likely to be able to produce the same results for your project.

The root of successful budget containment lies in allowing a sufficient amount of planning time to thoroughly define the scope, schedule, quality, risk, resources, and budget for the construction project before the bid invitations are sent out to contractors.

10 Great Commercial Construction Tips

Commercial construction can be a big undertaking, both literally and figuratively. You might think you have it all under control, but do you really? Here are ten tips that will help make your next commercial construction project a success.

1. The lowest bid is not always your best choice. It’s a counter-intuitive thought compared to everything we have been taught. But even in these times of wanting to be sure to keep the bottom line in check, it’s important to find the best price for the project. Sometimes the low bid is that way because the contractor has no idea what the job entails, and other times they will come in low, get a payment or two, and then abandon the job.

2. Go online and do your research. Check references, run the contractor’s board numbers, and study the backgrounds of your contractors so you can know before you sign on the dotted line just what you are getting. The internet can also be a source of information about current trends in commercial construction.

3. Find a contractor who specializes in what you want done. Sometimes the biggest isn’t always the best. A smaller contractor who is more adept at smaller jobs might be just the right thing your job needs. If you are revamping a store, consider finding contractors who specialize in retail space renovations.

4. Start with the general contractor and build from there. By bringing the general contractor into the job first, you are able to use their knowledge on the job from the beginning and have them help guide the project.

5. Go ahead and add on that maintenance agreement. Once the job is done, you want to ensure that your project will last for years to come. A good maintenance contract that checks over the equipment is a great idea to clean and maintain things like your furnace or drain pipes. A quick cleaning now is much cheaper than an expensive repair later.

6. Does the goal of the project further your company’s image and brand? If it doesn’t, it might not be the right project for you. This is a big capital expense, and you want it to pay off with a solid return on investment for you.

7. Your project should make sense. Do you have custodial closet doors that open inwardly? Did the customer service booth end up with only a small front-facing window? Double check the design proposal before you go out to bid to ensure that the concept diagrams and blueprints make sense and lead to positive workflow.

8. Along with number 7 goes ensuring that the areas like the office supplies and the copier are easy to get to and are going to keep things efficient in the office or administrative area.

9. Decorate in such a way that the colors and furniture enhance your brand and your company’s image. Your customers should feel like they are welcome in your new place, so be sure your contractor includes an interior decorator in the plans.

10. Be sure your contractors are all on board with the project and are capable of meeting the deadlines. This point is probably the most important one of all. Any delays are costly both financially and in terms of getting your business going again in the new location.

Hopefully these tips will help get you going in the right direction for your next project. Happy building!